WRRDS2400a Wall Mount Ductless Split – Outdoor Condenser no line set
$6,825.00
If you‘re looking for the most economical split system to purchase and install, this cooling–only unit is an excellent choice. It is ideal for rectangular rooms that require less than 15‘ of “throw“ and cellars that are quickly “turned over,” such as those with concrete or brick walls and without access to a mechanical room. With either an indoor or outdoor remote condensing unit, heat and noise can be moved away from the cellar, making it extremely quiet. The attractive, wall-mounted evaporator is controlled by a 24V digital thermostat with a large display and must be installed and adjusted by a qualified HVAC technician.
Applications:
• Wine Zone 2400a Ductless Split is most economical split system to purchase and install
• Wine Zone 2400a Ductless Split allows transfer of heat to a room not adjacent to the cellar
• This unit is perfect for both long storage as well as commercial applications where the wine will be turned over quickly
• For rooms already constructed, rooms with concrete or brick walls, and rooms without space for ducting
• For cellars without access to a mechanical room to house an air handler
• Can be used with either an indoor or outdoor remote condensing unit, moving heat and noise away from the cellar
• Extremely quiet, attractive, wall-mounted evaporator
• Attractive, 24V digital thermostat with large display controls the system
• Must be installed and adjusted by a qualified HVAC technician
Ductless Evaporator:
• Low noise evaporator fan and remote condenser design
• Economical way to cool, even where installing ductwork is impractical or impossible
• Requires only one small hole through the wall to run lines for refrigerant, electric, and condensate drain
• Washable filters
• Stylish grille cover is easily detached and cleaned
Indoor condenser:
• UL listed Copeland® commercial condensing unit.
• Uses R-134a refrigerant
• Air-cooled units standard
• Receiver for use with thermostatic expansion valve
• 4″ galvanized iron base
• Variable speed fan control
• Crankcase heater on all models
Outdoor Condenser:
• UL listed Copeland® commercial condensing unit.
• Uses R134a refrigerant
• Air-cooled units standard
• Receiver for use with thermostatic expansion valve
• Rainproof control panel box with liquid-tight conduit on the control panel
• Low ambient controls
• Variable speed fan control
• Crankcase heater on all models
Outdoor Enclosure:
• UL Listed enclosure
• Galvanized steel base
• 20 GA. Galvanized steel cabinet
• Hinged access for easier servicing
• Wind safety latch
• All-season weather protection
• Front louvers at a 45° angle
• Rain trough under hinge to catch moisture that might seep through hinge
• Condenser screen protected with high-temperature baked-on clear lacquer coating
Honeywell® Thermostat:
• Attractive styling complements any décor
• Large display for easy readability
• Keys are located by the display for easy access
• Easy installation, setup, and self-test save the installer time
• Set points permanently held in memory and are retained during power outages
WRRDS2400a Ductless Split Specifications
Condenser:
Voltage Ampacity Max. Fuse Min. Wire Size RLA/LRA dB
115-60-1 9.5 15 12-2 w/Gr 6.9/39 50
➢ 1/4” x 3/8” line set up to 70 equivalent feet. See the installation instructions for line set sizing up to 200 equivalent feet maximum.
➢ Unit is not precharged and must be evacuated
➢ For use with R-134a refrigerant.
➢ Indoor condensers must be installed in a room with a minimum of 1240 cubic feet of free space
➢ Dimensions:
Indoor Unit: 25” x 20 1/2” x 14 1/2” 89 lbs.
Outdoor Unit: 27” x 20” x 20” 114 lbs.
Wall-Mounted Evaporator:
Voltage Motor Output Filter dB
115-60-1 12 Watts Washable 40
➢ Receives load voltage from condenser
➢ Drain line is 5/8” barbed
➢ Dimensions: 29 3/8” W x 10 5/8” H x 8 1/8” D 17 lbs.
Thermostat:
➢ PRO 1 or Peco 12532 if ordered with humidifier
➢ 18-gauge 5-wire to the condenser
Approximate Shipping Weight: 210-250 lbs
Crate Size: 31” x 37” x 41” T
