CellarPro 3200/4200 VS & Split Duct HOOD (Cold Side) High Relative Humidity RETRO #17328
$1,060.00
Shipping $55.00
CellarPro VS / Split Duct HOOD (Cold Side) + REMOTE RETROFIT. Duct openings are designed to attach to two 8-inch ducts for evaporator intake and exhaust. Ducting should be 8-inch or greater from start to finish, and must not be reduced. Custom design allows access to controls and switches on the face of the cooling unit.
Requires 9 inches of additional height at the front of the cooling unit.
Kit includes: Insulated duct hood, remote control display kit and bottle probe. Insulated (R-6) ducting 8-inch is not included with this kit.
The high fan speed setting is required when ducting our cooling units
CellarPro VS/Split Duct HOOD (Cold Side) HIGH RH RETROFIT (P/N 17328). Duct openings are designed to attach to 2 insulated 8-inch ducts (not included) for evaporator intake and exhaust. Custom design allows access to controls and switches on the face of the cooling unit.
Requires 9 inches of additional height at the front of the cooling unit.
Kit includes: Insulated duct hoods for cold side intake and exhaust, bottle probe and remote control display kit. Insulated 8-inch or greater (required from start to finish) ducting is not included.
The high fan speed setting MUST be used when our unit is ducted.
Please refer to the following resources before purchasing this kit:
This duct hood is required when the cooling unit will be installed in unconditioned environments, subject to the limitations listed in our Low RH vs High RH Duct Kit Chart. In some cases, the conditions are too extreme for any of our cold-side duct kits.
Use our ducting heat loss table and our duct correction table to correctly adjust the sizing of your cooling unit, because ducting will add to the thermal load of the cellar.
Refer to our Bottle Probe Operating Instructions to correctly set the cooling unit depending on how you’re using the Bottle Probe
Brand:Â CellarPro
Size:Â 14 1/4w x 4 3/4d x 27 1/2h (in)
Weight:Â 45 lbs
Capacity:Â 100 Equivalent Feet
Warranty:
1 Year
Click on one of the following links for more information:
Custom duct HOOD for CellarPro 3200 / 4200 VS and 3000S / 4000S Split Refrigeration Systems. With this kit, the cold air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening). Insulated ducting is not included.
- Attaches easily to the front of 3200/4200 VS and 3000S/4000S Split refrigeration systems
- Appropriate for Unconditioned / High-humidity environments
- Provides access to cooling unit control panel and switches
- Designed for easy hook-up to insulated 8″ ducting (not included)
- Both openings must be ducted (total of 100 equivalent feet) to/from the cellar
- Maintains accurate temperatures inside the wine cellar
- Includes our remote thermostat bottle probe (measures air or liquid temperatures)
- Includes our remote control display kit
- Designed for use when the cooling unit has shipped, to be installed by a local tech