CellarPro 1800H- ECX
Houdini Cooling Unit
#25544

Brand: CellarPro

UPC: 077757255441

Size: 36 1/2w x 10 1/2d x 10h (in)

Weight: 80 lbs

Power/Rating:
115V AC / 60 Hz
Compressor Amps:
– Startup (LRA): 22.2 Amps
– Unit Amp Rating: 4.7 Amps
– Total Watts with Fans on Low: 411
– Total Watts with Fans on Low: 399
– Compatible with Dedicated 15-Amp Circuit

BTUH @ 55F:
– Low Fan Speed: 1456 BTUH
– High Fan Speed: 1864 BTUH
– 1/4 Ton Nominal

Warranty Resources
– Warranty Overview

Click on one of the following links for more information:

• Spec Sheet
• Owner’s Manual
• Cut Sheet: Airflow Cutouts
• Cut Sheet; Control Locations
• Cut Sheet: Dimensions Cut Sheet
• Duct Hood Drawings: As Ducted

CellarPro 1800H-ECX Cooling Unit (P/N 25544). CellarPro engineered the 1800H-ECX cooling unit specifically for shallow-depth glass wine cellars.

Just 10 1/2-inches deep and 10-inches tall, the 1800H-ECX Houdini cooling unit is designed to “disappear” inside – or atop – the cellar. Dual independent variable-speed fans offer flexibility to trade-off between super-quiet operation vs maximum performance.

For example, assuming 75F ambient temperature, R13 insulation in the non-glass walls and no ducting, the 1800H-ECX would work in the following cellars:

All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space – it must come from space outside the cellar.

Variable-speed fans with independent control provide maximum flexibility and versatility, as follows:

• Features energy-efficient EC Fans on both the cold and hot sides
• This unit can be configured to pull fresh air ranging from -20 to 95F. If the unit’s location does not provide sufficient room for the unit’s exhaust to dissipate and/or fresh air to be provided, you may need to purchase a rear duct kit. We recommend the addition of a fan cycling switch when fresh air intake will be below 20F.
• The unit must be placed indoors in an area that is above 32F.
• Dual high-output fans come with independent variable speed settings for your choice of maximum cooling power at the high fan speed, or super-quiet operation (49 decibels) at the low fan speed.
• Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
• Custom coils generate maximum cooling power inside the cellar.
• Excess condensate is managed with a high-capacity stainless steel condensate pan and 100W electric heating element.
• Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion.
• Intuitive LED display panel mounted on the evaporator with digital programmable thermostat is simple and easy to use. Remote thermostat is available as an upgrade.
• Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
• Temperature set point range is 47F to 62F when the cooling unit is properly sized.
• Unit operates with minimal vibrations and less noise than comparable units from competitors.
• Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
• With dual power sources and a 10-foot power cord, the unit can be plugged into a receptacle from either the rear or right side of the cooling unit, providing flexibility for most installations.
• Common dedicated 15-amp circuit is required to power the unit.
• Mounting brackets, included as standard equipment, ensure easy installation.
• Removable steel case provides access to the internal components for servicing and repair.
• CellarPro’s 5-Year Standard Warranty, the most thorough in the industry, protects the unit against manufacturing defects.
• An optional Extended Warranty (P/N 1836) is available for additional protection.
• ETL Tested and Certified to rigorous UL Standards for safety.