CellarPro 1800 Condensate Drain Line BOTTOM + Heating Element #7432
$245.00
Shipping: Free (Factory Installed)
Must be ordered with a CellarPro Unit
CellarPro Condensate Drain Line Bottom + Heating Element 1800. When the wine cooling unit will be installed in a wine cellar with hot, humid conditions, our 100W heating element is designed to burn off excess moisture. In addition, the 1/2-inch ID condensate fitting and 8-foot clear vinyl tube allows overflow condensation to exit from the bottom of the cooling unit.
Please note: This item will work only in 110V environments. The drain line is located 7-inches from the rear of the cooling unit. Therefore, the front 10 inches of the cooling unit MUST be located inside the wine cellar when used with this configuration.
Condensate Drain Line Bottom + Heating Element CellarPro 1800 (P/N 7432). When the wine cooling unit will be installed in a wine cellar with hot, humid conditions, our 100W heating element is designed to burn off excess moisture. In addition, the 1/2-inch ID condensate fitting and 8-foot clear vinyl tube allows overflow condensation to exit from the bottom of the cooling unit.
Please note: This item will work only in 110V environments. The drain line is located 7- inches from the rear of the cooling unit. Therefore, the front 10 inches of the cooling unit MUST be located inside the wine cellar when used with this configuration.
Brand: CellarPro
Size: 10 feet (drain line)
Warranty:
1 Year
Click on one of the following links for more information:
Condensate drain lines are strongly recommended for wine cellar installations of 1800 Series wine cooling units in humid environments with 110V power and/or when the drain line cannot be used. This item MUST be factory-installed – it cannot be retrofitted in the field.
- 100W internal heating element
- Works in 110V environments
- 1/2-inch ID condensate fitting
- 8-foot drain line
